Three models that solve different fit problems
| Model | Rated wash capacity and type | Product size | Extra measurement that matters |
|---|---|---|---|
| LG FV1285S4W | 8.5 kg slim front load | 600 × 850 × 475 mm | LG also lists 535 mm from back cover to door and 1,015 mm deep with the door open at 90°. |
| Samsung WW90DB7U94GESP | 9 kg front load | 600 × 850 × 595 mm net | Samsung’s dimensional illustration shows 640 mm depth. Check protrusions and the installation drawing rather than measuring for the net figure alone. |
| Panasonic NA-F85S11BRQ | 8.5 kg top load | 562 × 970 × 571 mm | Check the height and reach needed with the lid fully open. Dimension order is normalised from the Singapore manual. |
These are manufacturer data for the listed Singapore models, checked against their specification or manual. We did not test stain removal, spin noise or life span. A capacity rating refers to the model’s nominal wash capacity. Check load limits for the actual cycle you will use and whether you are buying a washer or a washer-dryer.
Measure the recess and the route to it
- Measure clear width, height and depth at the narrowest points. Allow for skirting, an uneven floor, tap and plug projection, hose bend and the manufacturer’s back and side clearances.
- Check the loading position. Stand where the door would swing or the lid would lift. Measure the space available to open it and lift out laundry. A hinged cabinet or folding laundry rack may be the obstruction, rather than the washer’s body.
- Check the gate, entrance turns, lift and inside corridor with the delivery company. Use the packaged size where required. Ask whether delivery includes levelling, connection, a test cycle and removal of the old machine.
- If stacking a dryer, verify both model numbers and the exact stacking kit. A similar footprint does not prove their compatibility.
Use the water label and a realistic load
PUB’s WELS guide lists a two-, three- or four-tick scale for household washing machines. Check the exact registered model and use the water-consumption figure on the label when comparing. Similar product names from another market may have different capacities, labels or dimensions. A model’s water label does not tell you how much electricity every programme will consume.
Base your load on your normal sheets, towels and clothing rather than only how many people live at home. A very large drum may offer little benefit if you rarely fill it. If washing bulky bedding, check the maximum load for that particular cycle in the manual rather than relying on the headline drum rating.
Check support before you choose the seller
Look for local model support such as LG’s FV1285S4W support, Samsung’s WW90DB7U94GESP support or Panasonic Singapore’s delivery and warranty FAQ. Compare the appliance warranty with any longer motor coverage and ask which parts and labour it covers. Check installation, repair call-out arrangements and replacement items such as a drain hose or filter. Save the invoice and the correct variant code so service can identify the unit later.
Check the two working spaces for a front or top loader
A washer needs one space when it is closed and a different space while you load, drain or service it. For a recess with 575 mm from the back wall to the cabinet front, the LG model’s 475 mm figure leaves 100 mm on paper. The manufacturer’s 535 mm figure from the back cover to the front of the door leaves 40 mm. Measure where the tap and hoses sit and check LG’s installation requirements before deciding that 40 mm is enough. Mark the door swing separately using the manufacturer’s 1,015 mm open-depth drawing.
If the top of the washer will sit under a counter, shelf or suspended rack, make a second measurement from the floor to the lowest obstacle. For the 970 mm Panasonic top loader, a 1,150 mm shelf leaves 180 mm above the closed lid in this hypothetical recess. Open the lid on a display unit or ask Panasonic for its open height and loading clearance. You need space to lift the lid and to pull a wet towel out while standing beside it. A shallow recess and a low shelf may favour different opening styles.
Take three photos for the installer. Photograph the water connection and the drain, the socket and skirting, and the space where you will stand. Include the tape measure or a written dimension in each photo. Measure the width close to the floor and again at the height of the widest part of the machine. A slightly irregular utility room can have more clearance at shoulder height than where the washer actually goes.
Check the tap, drain and the path to the service panel
Locate the water shut-off where you can reach it once the washer is installed. Water and drain connection requirements come from the manual for the chosen model. Give the installer the measured distance to the tap and the drain and ask whether the supplied hoses can reach. If a different length, adaptor or other fitting is needed, ask for a compatible part and an itemised quote. Tell the seller about a raised drain, an existing leak or water left in the utility area so it can confirm what its standard install includes.
Ask the delivery team how it will level the feet and run a short test before leaving. You can watch for movement, a pinched hose or water around the new connection during that test. On the front loaders, use the manufacturer’s instructions for transit bolts and keep any parts the manual says are needed for a future move. Locate the user-accessible filter or drain access mentioned in the manual and check whether a wall, curb or cabinet door will block it.
A washer with a dryer above it creates a different service problem from a free-standing unit. Start with the exact model codes for both. Ask which manufacturer-approved kit supports the pair and whether your installer can fit it on that floor. Confirm how a technician could pull out the washer later. If you cannot reach a connection without dismantling the stack, plan where the machines can go during a service call.
Use litres per cycle and your wash routine to compare costs
Compare the full water-consumption figure and the exact tested model in the PUB water-efficiency scheme. To understand scale, imagine two washers using 50 and 65 litres for the same rated programme. At five such loads a week for 52 weeks, the 15-litre difference equals 3,900 litres, or 3.9 cubic metres over that year. Multiply that by the water charge you actually pay per cubic metre to estimate the difference for that example. Programmes and real loads can yield different figures.
Compare weekly loads in addition to the headline capacity. If you wash a small uniform load most days and towels at the weekend, find the small-load options and the restrictions for the towel programme. Check how the door opens, whether someone can take a heavy wet load out comfortably, and what happens when you need to pause a programme to add clothing. These details can matter more in daily use than a half-kilogram difference in nominal wash capacity.
If one listing combines a washer and a dryer, check the separate drying load and whether a full wash needs to be split for drying. Estimate which loads you genuinely intend to dry and include the space for hanging the rest. For flats with limited drying space, also check whether the door and a laundry rack can be open at the same time.
Put delivery, warranty and small parts on the same quote
Quote the full model number to two sellers and ask for the price including delivery to your floor, installation, required hoses or fittings and pickup of the old unit. List stairs, tight turns and a loading-bay restriction before paying. Put “yes”, “extra charge” or “confirm” beside each item. A lower advertised machine price can be overtaken by a second fee for access or removal.
On delivery day, compare the label on the unit with the order and invoice before signing. Keep the manual and note the serial number. Ask where you would make a warranty claim and what is required for registration. After a repair, the next owner or technician will have the exact local model and service history to work from.
Choose the type for the way you empty and dry a load
Try the loading motion from where you will stand at home. With a front loader, place a laundry basket where the door can still swing and see whether you can move wet sheets out without setting them on the floor. If the approach from the side is narrow, check which side the door opens on for that model. With a deep top loader, use the showroom to judge how comfortably the shortest person in the household can reach the base. Ask about the actual model if a similarly sized display has a different drum or lid.
If you often start a load before dinner, check its usual end time against your drying routine. A wash cycle that finishes after the utility area is occupied changes where you will put the clothes. Look up whether the model offers an appropriate cycle or finish-time setting and check any restrictions in its manual. Compare two models on that same load, setup and schedule before you buy.
Sources
- LG FV1285S4WNominal capacity and body, closed-door and open-door sizes
- LG product supportLocal model and manual
- Samsung WW90DB7U94GESPNominal capacity and separate dimensional figures
- Samsung product supportLocal model support
- Panasonic NA-F85S11BRQSingapore top-load variant
- Panasonic installation and operating manualModel dimensions and installation
- Panasonic warranty FAQLocal service and delivery terms
- PUB WELSWater efficiency labels and registered products