Compare compact, slimline and full-size Singapore-market models
| Model | Configuration | Manufacturer dimensions or size class | Check before buying |
|---|---|---|---|
| Electrolux EFC3862MS | Compact, 8 place settings | 550 W × 590 H × 500 D mm | Verify stable counter support, available overhead clearance and a usable hose path to the tap and drain. |
| Bosch SPS2IKW55K | Slim freestanding | 45 cm width class | Use the installation drawing to confirm exact width, height, depth, hose route and full door swing. |
| Electrolux ESA47200SX | Freestanding, 13 place settings | 598 W × 850 H × 622 D mm | A 60 cm width slot might still be too shallow once hoses and door projection are included. |
| Electrolux EEM48301L | Built-in, 14 place settings | 596 W × 818 H × 550 D mm nominal | Confirm measured cut-out, panel and plinth clearance against the current installation instructions. |
These are manufacturer listings for Singapore, compared by installation fit, stated capacity and support. We did not test washes or drying. Verify stock, included installation and compatibility with your kitchen before ordering.
Measure for use, delivery and drainage
- Measure the cabinet opening and the space in front when the door is open. Check if the door or pulled-out lower basket will block the passage or hit a cabinet handle.
- Measure the largest plate, pan or serving dish you plan to wash. Ask if it fits with the trays configured for your daily load. A place-setting count is a reference capacity and does not tell you exactly how much cookware fits.
- Trace the water inlet, drain and power connection to the installation point. Ask the installer to confirm the approved connections, hose lengths, drain arrangement and clearances. Avoid assuming “compact” means it can operate without plumbing.
- Confirm what the quotation includes before you pay. Connection work, cabinetry, a matching door panel for built-in models and disposal of an old appliance can be separate.
Read the water and energy figures on the same basis
Compare the litres per cycle for the same named test programme. Electrolux’s ESA47200SX specification lists 7.8 L for its Eco programme. This is not the figure for every cycle or every dishwasher. If you run an example 7.8 L cycle five times weekly, the arithmetic is about 2,028 L over 52 weeks before pre-rinsing. That is an illustration using an advertised programme figure, not a household measurement. Compare programme duration and energy use separately, and verify any local efficiency label for the exact model.
Ownership costs and service questions
Check the recommended detergent, and whether the water-softener or rinse-aid compartments need supplies under the operating instructions. Ask what happens when a rack roller, door seal or spray arm wears out. The full appliance model and revision number help identify the replacement. Electrolux’s local dishwasher support and manual lookup are starting points. Read the warranty for local installation, parts and labour coverage before accepting a deal.
Check the daily load against the actual racks
Bring the diameter and height of your usual dinner plate, the length of your largest utensil and the dimensions of your most-used pot to the retailer. Check those pieces together in a showroom rack or against the loading diagrams in the manufacturer manual. Elevating the top basket for lower-rack plates can reduce clearance above tall glasses. Check both racks before deciding which basket setting to use. Ask whether a third tray, cutlery basket or fold-down support comes with the exact model and where you can put a long utensil without blocking a spray arm. This gives a more realistic answer for your household than comparing stated place settings alone.
Mock up a genuine dinner load before choosing a width
Start with plates, bowls and cups for a meal you actually cook, then add the largest pot, pan and serving dish you want to wash in the same load. At the showroom, use the rack dimensions or samples to see whether the plate angles and tine spacing suit your items. A bowl that nests too tightly against its neighbour can stop water reaching a surface. Check where wide handles sit, how far the top rack can move and what would happen to space below if you raise it. Find the tallest usable position for cookware you wash most often.
A compact example is often easier to place, but use the opening and rack measurements to see whether your pots fit. If it only takes the dinnerware, decide if the remaining cookware can be handled conveniently at the sink. In a narrow kitchen, a slim full-height model frees some room across the cabinet gap, while a full-size unit can leave you more flexibility inside. Consider the placement and wash routine together.
For a household that hosts occasionally, compare the regular load with the plates and glasses from a larger meal. If the smaller model would need one more run just after that meal, check whether you have time and space to stack the waiting dishes safely. A family using many containers during the week may care more about where the lids and plastics stay put during washing than how many cups fit in a demonstration load.
Check the position with the dishwasher open
Use the installation drawing for door projection. Put a tape marker at the outer edge of the open door and stand where you would lift a stack of plates. Open the closest cabinet or another appliance to see whether both operations can happen together. If the entrance to the kitchen is beside the dishwasher, test whether someone can still get through during loading. Plan a place for detergent and cleaning items where they are accessible and stored according to their packaging instructions.
Check the route of the supplied water and drain hoses with the installer. Give them the model and photos of the shut-off, drain and socket. Ask whether their quoted work can use the existing fittings and what service access needs to remain after installation. A countertop unit needs a surface with suitable support and enough room around the installed appliance. Account for a door opening down and clearance to remove a full basket as well as the dimensions of the closed cabinet.
If a freestanding machine is going below a worktop, ask the manufacturer which parts are designed to be left in place and whether the model can be installed in that space. A similar cabinet width does not tell you how its levelling, top clearance or hose routing works. Use the fitted dimensions from the model instructions.
Compare the programme you are likely to use
For the water and energy comparison, write the programme name, litre figure and loading conditions from the label or the exact specification. A quick cycle, automatic programme and the one used to establish the label can behave differently. If one labelled example uses 9 litres and another 12 litres on the same basis, the difference at four cycles a week is 624 litres over 52 weeks, or about 0.62 cubic metres. Check actual programmes against your cooking routine before estimating costs.
Make a separate note of time and arrangements for wash and drying. If you run the machine after dinner, the elapsed time matters if you need the dishes back for that evening. If you mainly wash food containers with lids, ask the seller or read the manual for what surfaces and detergent the programme supports. Check what happens when a model opens the door at the end of a cycle and whether the kitchen has space for its full movement.
Read the PUB WELS guidance for how registered models and figures are displayed. Compare water, power and consumables in the same ownership estimate. Ask what is included in the first delivery and what you must buy before first use. Then use your actual tariff and cycle count if you need the comparison to inform the budget.
Check who will service it and how it can be removed
Record the dealer and the exact sold model number. Ask which local support office takes a call for drainage trouble, poor drying or a damaged basket. Check whether delivery includes connection, a test cycle and removal of the previous unit. When the installer is finished, keep the delivery and connection records. A future technician can use them to see what fits behind the unit and which connections might need to be shut off first.
Run the first load with the installer’s instructions in hand
Before starting the first wash, confirm what the local manual says about detergent, rinse aid and water hardness settings. Check where the model’s filter sits and where the spray arms can turn. Use the loading directions to arrange the items you are most likely to wash together. Keep tall plates and utensils clear of the arms and the detergent dispenser according to the rack diagram.
After the first load, note what came out wet or still dirty. If a tray blocked a spray arm or stopped a door from closing, change its position and try again with the recommended programme. Write down the cycle and rack position that work for the household so that two people loading the machine use the same setup. Retain the exact manual for model-specific instructions about cleaning the filter and maintaining the machine.
If you cannot reach a rack or remove the filter at the installed angle, show the seller or installer where the access problem occurs. Check whether the height, door clearance or a nearby cupboard can be adjusted while preserving the manufacturer’s requirements.
Sources
- Electrolux compact EFC3862MSCompact model dimensions and capacity
- Bosch slim SPS2IKW55K45 cm class and installation downloads
- Electrolux freestanding ESA47200SXSize, capacity and Eco water figure
- Electrolux built-in EEM48301LNominal size and installation format
- Electrolux dishwasher supportLocal service collection
- Electrolux manualsModel-specific instructions and parts links