Three local models, compared at 30°C and 80% relative humidity
| Exact model | Extraction rating at 30°C and 80% RH | Tank | Consider it if |
|---|---|---|---|
| novita ND298 | 12 L/day | 2.6 L | You want a smaller unit and the option of connecting a drain hose. |
| EuropAce EDH3160EWH | 16 L/day | 1.6 L | You can empty a small tank regularly or confirm a workable drainage setup before purchase. |
| novita ND25.5i+ | 25.5 L/day with CarbonPlus alternative. About 23 L/day with the H13 HEPA and CarbonPlus combination. | 4.5 L | You want a larger tank for regular damp loads and have space for a 378 × 273 × 580 mm unit. |
We compared the manufacturers’ Singapore-market specifications in the same rated conditions. Filter configuration still matters. These are practical examples from a desk review with no independent extraction, noise, or drying-time measurements. Prices, warranty coverage and stock should be confirmed against the exact model.
Extraction capacity is different from tank capacity
A 16 L/day label means that amount could be extracted over 24 hours under the stated test conditions. It does not mean the machine can store 16 litres before you empty it. In the examples above, the higher-rated EuropAce has the smaller tank. If you expect the machine to run while you are away, check its overflow shut-off and whether a suitable hose and route to a drain exist. Follow the instructions for hose height and length rather than assuming a gravity drain can pump uphill.
Real extraction changes as room temperature and humidity fall. A larger unit will not necessarily perform like its 30°C rating in a cooler air-conditioned bedroom. A rated area also assumes particular conditions. Pick the room you can close off and compare results for that space, rather than promising one unit will dry an entire flat through open doors.
Pick a setup for the moisture source
- Indoor laundry: start with a ventilated rack layout and space around the unit’s inlet and outlet. The available tank or drain can limit unattended run time. Judge success with how quickly your usual load dries and whether the room remains damp, rather than an assumed number of shirts per cycle.
- Bedroom or study: check dimensions, airflow and sound at the setting you expect to use. A manufacturer’s low setting figure does not predict noise in every room. Try putting a separate humidity meter away from the outlet.
- Persistent damp in one spot: check whether the moisture comes from a leak or condensation. A dehumidifier removes water from the air. Fix the source if moisture keeps returning.
Budget electricity, filters and local repairs
Estimate operating cost with average watts × hours ÷ 1,000 × your electricity price per kWh. Use consistent conditions when comparing manufacturers’ power figures. For example, an average 200 W over 6 hours is 1.2 kWh, before allowing for standby or automatic cycling. That is a calculation, not a measured draw for any model in the table.
Check the local consumable page and match suffixes. novita’s filter catalogue lists separate products for the ND298 and several versions of the ND25.5. The ND25.5+/ND25.5i+ filter pack identifies the compatible current variants. Ask the manufacturer who handles service in Singapore, what the warranty covers and how to buy a replacement tank or filter if needed.
Run a simple room check before changing settings
Place a separate room hygrometer at a height you can read and away from the direct outlet of the machine. Note the starting humidity and temperature, the time, and whether the doors and windows are normally open or closed. Use the same spot again after a comparable period of operation. Observe when the tank fills or whether the hose actually drained. A short trial in your own room can show whether the machine keeps up with the moisture it encounters there.
If one day of use follows wet laundry and another follows a dry routine with the windows shut, record those conditions separately. They affect the load the machine sees. Return the furniture and doors to their usual positions before comparing two possible placements. A reading in front of the dry-air outlet may differ from the reading at the corner where you are trying to reduce dampness.
Compare refills at the times someone will be home
Use a trial extraction volume for the schedule. Suppose a room produces enough moisture for the unit to collect 1.2 litres in an afternoon under those conditions. A tank listed at 1.6 litres has 0.4 litres of nominal capacity left, while a 2.6-litre tank has 1.4 litres left. The usable threshold can differ from the nominal figure. Confirm where it stops in the manufacturer’s instructions. If you plan to leave it running, use the shutdown and drainage arrangements specified for the model.
For a continuous drain, use the fittings and hose route allowed by the manual. Check whether gravity drainage needs a steady downhill run. If the best location is far from a drain, decide whether you would rather empty the tank closer to the damp room or move the machine nearer a drain so it can operate there. Verify both the drainage and power arrangements before leaving the machine unattended.
Compare the moisture problem before buying a larger unit
If a wardrobe backing, wall patch or window corner stays wet after the room’s humidity falls, investigate how water is getting there. Check for nearby plumbing, outdoor rain exposure or collected condensation. Inform the owner or building manager where appropriate. A dehumidifier can remove moisture from room air, while a leak repair or ventilation change addresses a source. Keep a dated photo and a few readings if you need to explain when the problem appears and how it changes.
Treat sound as a placement question
Ask which fan or compressor mode the advertised noise figure describes. Listen in a quiet room if the shop offers a demonstration, and note the speed you will use most. For a unit near a bedroom, plan where you can move it if the sound carries through the door. Recheck the space for intake and exhaust at that second location.
Sources
- novita ND29830°C/80% RH extraction, tank and hose
- EuropAce EDH3160EWHRated extraction and tank
- novita ND25.5i+Filter-dependent extraction, dimensions and tank
- novita filter catalogueModel-specific local consumables
- novita ND25.5i+ compatible filtersCompatible variants and replacement guidance