Start with the outlets you need to serve
An electric instant heater warms water as it runs and typically serves its own shower. It takes up little space, especially in a bathroom with no practical tank position. The shower experience depends partly on incoming flow and pressure, the heater’s rated input and the shower fittings permitted by the manufacturer. Send the installer your current unit and shower model if you want to know whether anything can be retained.
A storage heater heats a tank for later use. It can feed suitable mixer outlets through a hot-water pipe network, depending on the home’s plumbing. The usable supply depends on the tank size, water already drawn, the heat recovery and the way hot water is mixed with cold at the outlet. Ask for a recommendation based on who showers in the same hour and which outlets may run together. A couple with one evening shower at a time puts a different demand on a system than a household using two bathrooms each morning. Example of a 30 L storage heater and PUB water heater and fittings requirements
Gas instantaneous heaters are a separate option where a suitable gas service and approved location are available. Ask the gas provider about eligibility and a site survey before committing. City Energy Life distinguishes straightforward gas replacement from a new gas connection to the heater and conversion from an electric model. Those jobs use different scopes and may involve additional water points or pipework. City Energy installation categories
Four local electric water heaters compared
Singapore manufacturer specifications were checked on 19 November 2026. Compare the exact code on the quote and the carton. Values below describe the appliance and the manufacturer’s test conditions. Your tradesperson checks the installed position and load.
| Exact model | Type and published figures | What the comparison tells you |
|---|---|---|
| Ariston Aures Top 3195405 | Instant, 3.3 kW. Body 416 H × 200 W × 81.5 D mm. Published minimum flow 2 L/min. | Ariston lists SAFETY Mark 221033-11 and a five-year element and one-year parts warranty. Check the heater, supplied shower set and wall space as a combination. Aures Top data |
| Rubine GOGO RWH-933B/W | Instant, 3.3 kW. Body 375 H × 225 W × 83.5 D mm. No pump. Published minimum flow 2 L/min. | Rubine lists SAFETY Mark 190236-11. The package includes the handshower set. The casing is shorter and wider than the Ariston example. GOGO 933 sheet |
| Ariston Andris2 Top 30 Wi-Fi 3180582 | Storage, 30 L and 1.5 kW. Body 447 W × 447 H × 386 D mm. | Manufacturer heat-up figure is 50 minutes for a 35°C rise. Published empty weight is 13 kg. Andris2 data |
| Ariston Slim3 Top Wi-Fi 30 L 3180934 | Storage, 30 L and 2.5 kW. Body 757 W × 330 H × 334 D mm. | Manufacturer heat-up figure is 29 minutes for a 35°C rise. The long body uses less height and more wall width. Have the load confirmed before buying. Slim3 data |
The two 30 L examples show why you should compare width, clearance and electrical input alongside capacity. The 1.5 kW unit needs a roughly square wall area. The 2.5 kW unit has a shorter published heat-up time and requires an independently suitable electrical installation. A 30 L tank also holds about 30 kg of water when full, on top of its empty weight. The installer needs to assess the location and support.
Check your electrical loading and the exact registration
CPSO classifies both instantaneous and storage electric water heaters as Controlled Goods. Look for a SAFETY Mark on the exact heater and check it with the Register of Registered Controlled Goods, using the model number or registration number. Match the brand, model and supplier to the actual product. Small suffix differences can denote a different variant. Get a legible label photo if ordering online and check again on delivery. The numbers above are what the manufacturers publish. CPSO guidance and CPSO lookup instructions
HDB’s guidelines for flats with a 30 A main switch list an appliance limit of 3 kW for an instantaneous heater and 1.5 kW for a storage heater. The 3.3 kW instant examples and 2.5 kW Slim3 example therefore exceed the corresponding published limits for that category. HDB lists different conditions for 40 A flats and flats upgraded under the specified programmes. Ask your Licensed Electrical Worker to identify the applicable conditions and assess the circuit in person before you order. HDB electrical works table
A Licensed Electrical Worker should handle the electrical work and check the home’s residual current protection. CPSO says electric water heaters should be directly wired to the electrical installation and advises against a three-pin socket, extension cord or multi-way outlet. Ask who will carry out the work and who will check the installation at handover. For regulated plumbing alterations, confirm the involvement of a PUB Licensed Plumber. CPSO installation guidance, EMA electrical safety and PUB plumbing scope
Use the Energy Label and your own shower pattern
The power rating tells you the rate of energy use while heating. A 3.3 kW instant heater running at full rated input for ten minutes consumes about 0.55 kWh. At an illustrative S$0.30 per kWh, that is about S$0.17 of electricity. It is a full-input calculation. A real heater may modulate and the actual running time may differ.
The two 30 L storage examples list very different times for the same 35°C temperature rise. Multiplying the listed rated input by the listed time gives about 1.25 kWh for the 1.5 kW example and 1.21 kWh for the 2.5 kW example under the simplified assumption of continuous rated input. Faster heating can chiefly mean a shorter wait. For an energy comparison, use the Energy Labels for the exact models and consider how long heated water would sit between uses. Andris2 technical data, Slim3 technical data and NEA label method
NEA’s electric water heater cost figures use S$0.27 per kWh, three showers daily and different delivered-water temperature assumptions for instant and storage models. Read the assumptions so you can use the label as a common reference alongside your bill and routine. A different tariff or shorter shower will change your household estimate.
Choose a replacement when the old heater is still in place
For an instant heater replacement, start with the old unit’s brand and rating, whether its shower set is still present and what you want to change. If hot water has become inconsistent, describe when it happens, such as only with another tap running or at the start of a shower. Have the technician check the water supply and the current heater before you pay for a pumped model or a larger installation. The two 3.3 kW examples in the table have the same listed minimum operating flow, while their bodies and supplied features differ. Aures Top data and GOGO 933 data
For a storage tank above a false ceiling or in a cupboard, ask the tradespeople which parts of the enclosure would need to be opened and who will reinstate it. Request a quote for future access if the only way to reach the tank is through a finished panel. An appliance warranty may leave this work with the owner. Ariston’s published Singapore terms exclude fittings, piping and false-ceiling replacement and say labour and service charges can apply to tank leaks after the first year. Ariston Singapore warranty and service policy
If the replacement changes the heater type or number of supplied outlets, get a quote for the full conversion and a separate quote for keeping the existing arrangement. Compare any added disruption and expected wait for hot water, then ask the contractor to explain which parts are accessible for later service.
Ask for a price that covers the actual site
Send photos of the old heater and exposed wall or cabinet, a photo of the heater’s product label if accessible, the number of shower or mixer outlets and any constraints on scheduling. Leave electrical equipment closed. Ask if the contractor needs a survey before they can give a fixed price. A tight cabinet may have room for the appliance and too little room for service access or the connections. Confirm those dimensions from the manufacturer and tradespeople.
Compare supply, delivery, removal and disposal, authorised trades, required mounting and fittings, and any making good as individual quote lines. If the installer plans to retain the shower set, pipes or an existing switch, ask them to record compatibility and whether retained parts are excluded from the new installation warranty. Ask whether parts, labour and visit fees have separate coverage and which business answers if a leak develops after handover.
When you have only one working bathroom, agree who will coordinate the plumber and Licensed Electrical Worker and how long the bathroom will be unavailable. Have the installer demonstrate the controls and explain the maintenance schedule for the exact model. Keep the model and registration details, dated invoice and warranty contact together so a future service technician can identify what was fitted.
Sources
- Ariston Andris2 Top 30 Wi-Fi30 L tank, dimensions, rated input and manufacturer heat-up data.
- PUB requirements for water fittingsWater heater requirements and technical documentation for plumbing professionals.
- City Energy Life Macro MA-10WFE listingSupplier’s examples of replacement, first-time installation and conversion scope.
- Ariston Aures Top 3195405Local model dimensions, input, flow and manufacturer-listed registration number.
- Rubine GOGO 933 technical sheetDimensions, rated input, minimum flow and component warranty for RWH-933B/W.
- Ariston Slim3 Top Wi-Fi20 and 30 L dimensions, rated input and manufacturer heat-up data.
- CPSO electric water heater safety guidanceSAFETY Mark, licensed electrical work, and requirements for safe household use.
- CPSO SAFETY Mark lookup instructionsHow to look up exact model and registration number.
- HDB electrical works guidelinesWater heater and electrical loading conditions for HDB flat categories.
- EMA household electrical safetyLicensed electrical work and household residual current protection.
- PUB regulated plumbing scopeWater service work and engaging PUB Licensed Plumbers.
- NEA Energy LabelTest and annual cost assumptions for energy-labelled water heaters.
- Ariston Singapore warranty and service policyExclusions, one-time tank replacement and service or labour conditions.