Compare the sofa footprint, bed size and cover

Retailer-listed examples in Singapore. The bed size is the sleeping surface.
ModelSofa width × depth × heightBed width × lengthLayout and care
FortyTwo Ilse Storage Sofa Bed120 × 76 × 92 cm120 × 190 cmCompact loveseat with internal storage. The listed removable covers are for the pillow and armrest cushions.
IKEA NYHAMN, pocket spring/Knisa grey-beige200 × 97 × 90 cm140 × 200 cmFold-flat frame with a separate pocket-spring mattress. The cover removes for machine washing. Check the separate mattress care label.
IKEA FRIHETEN, Faringe light grey corner230 × 151 × 86 cm140 × 204 cmCorner sofa with chaise storage and a pull-out section. The main frame cover is fixed.

NYHAMN and FRIHETEN both have a 140 cm-wide sleeping surface, but their closed dimensions differ. FortyTwo lists a maximum bed load of 150 kg for Ilse. Compare the setup for the intended sleeper or sleepers, including length, usable width and any ridge or joint across the sleeping surface.

Test the whole movement with furniture in place

Mark the closed footprint with tape. Then ask for the maximum front and rear reach during the conversion. The bed’s mattress measurements alone do not account for arms, trim, the back moving away from a wall or space to stand while opening it. Open or pull it out at the showroom if you can, and ask whether the chaise can be fitted on either side for the exact version.

For a simple room test, suppose the opened sofa needs 145 cm from the wall and the opposite furniture starts at 205 cm. That leaves 60 cm between the bed and the furniture. Check that the remaining route lets you open the bedroom and room doors and move around after dark. Test the route with the coffee table and rug in their real positions.

Choose for occasional guests or frequent sleeping

Try the bed as well as the seat. Check how the sleeping surface feels along the middle and edges, and whether the mattress or support is replaceable. Fit sheets to the published bed size and mattress thickness rather than assuming that a “double” label is enough. If you add a topper, check whether it has to come off before folding and where it will be stored.

Read the separate care instructions for the cushion, upholstery and mattress. A washable small cushion cover says little about cleaning the full sofa. Compare removable covers by whether you can buy a replacement in Singapore.

Measure the biggest carton and route to assembly

One FRIHETEN box is 207 cm long, and the NYHAMN frame package is 200 cm long and 75 cm wide. Ask for every carton’s dimensions, the lift cabin and door clearance needed and the turn into the room. Check whether assembly and taking away packaging are included. Review IKEA furniture delivery or FortyTwo’s lift-access guidance before scheduling the order.

Check whether the storage and layout work on a guest night

Lay out what will move before your guest arrives: the bedding, loose back cushions and anything on the coffee table. The FRIHETEN listing shows storage under the chaise seat. Confirm which way the lid opens in your room and whether you can reach the bedding before or after opening the bed. In a narrow room, test the bed with the rug where it normally sits, then check whether the open bed obstructs an outlet or the window. For frequent use, ask to repeat the conversion in the shop. The number of pieces you need to lift or store is part of the daily decision.

Make a night-time plan before choosing a bed shape

Draw the sofa in its daytime position and then draw the usable bed area. On the second drawing, add the remaining walkway to the bathroom and exit. If the sofa is the only way someone can sit in the living room, decide whether they still need a seat when the bed is open. Test the furniture movement from the direction one person would operate it. Some designs draw the bed towards the room from the front. Others need clear space behind or at the side of the frame.

For a narrow home office, measure the desk, chair and sleeping surface at the same time. If the desk chair can fit under the desk, make sure it still leaves a way to walk around the open frame. For a lounge with a chaise, record whether you can put the chaise on the side that leaves a route around it. Confirm how the specific model configures and which cushions have to move during conversion.

Check what two guests would share

Measure the full bed width and length that each person can use. In the examples above, a 120 cm width gives two people a nominal 60 cm each, and a 140 cm width gives them 70 cm each. The number is a starting point because seams, arm positions and moving edges can affect the comfort of the full surface. Ask the retailer where the supports sit and whether one person can get out without crossing the other. If you have a repeat guest, ask which part of the setup is hardest for them to use.

Check sheet sizes and see where pockets or elastic can grip. A conventional fitted sheet may need a different depth or may be hard to secure near a sofa mechanism. Check the mattress care instructions from the actual model. Plan where sheets and pillows will go while the furniture is used as a sofa. If you want to use a topper, confirm it fits the bed surface and has a dry storage spot when packed away.

Include the whole setup in the price

Match the frame, cover and mattress to the retailer’s exact item or combination. Include delivery, assembly and any mattress or cover sold separately. If part of the expense is for bedding, write it on a separate line. Ask whether a replacement mattress, fastening part or cover is sold independently so you know how you would maintain it after the first year. Read the delivery company’s notes for the heaviest box and record where the frame can be assembled before moving it into position.

Sources